Victron Phoenix Inverter
Using a dedicated Victron Phoenix Inverter is a great way to power your Starlink or other onboard AC devices on your vessel or vehicle. These pure sine wave inverters take 9-17 volts DC input and convert it to 120-volt AC. These inverters are available in various continuous output wattage ratings from 375 to 1200 watts. For Starlink, we recommend at least a 500-watt inverter.
By using the optional Victron VE. Direct Bluetooth Smart Dongle and the free Victron mobile app, you can control and monitor your inverter from your mobile device.
Features
Fully configurable
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- ECO mode on/off and ECO mode sense level
Monitoring
Input and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two-pole connector, or between battery plus and the left-hand contact of the two-pole connector.
LED diagnosis
DC connection with screw terminals
No special tools needed for installation
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart Dongle needed)
[ITEMPRICE]