Peplink Maritime 20G Dual LTE/5G Antenna
 |
| Want to learn more about the new Peplink Maritime series antennas? |
| Check out the SeaBits review of the Peplink Maritime 20G and 40G antennas. |
Designed for Maritime Applications
IP68 rated, durable and UV-stable housing an omnidirectional antenna for the best signal reception. Certified quality protection from dust, water, and UV allows you to use it even in poor weather conditions.
Ultra-wide bandwidth
Wide frequency range (410-6000MHz) for supporting LTE, 5G and Wi-Fi connectivity.
7dBi High Gain
Increased signal strength for a stronger connection and less interference.
Designed for 5G and 4G
Optimal gain, 2x2 MIMO antenna configuration for the best performance for maritime installations. 5G can reach speeds 10x faster than 4G LTE. Download movies in just seconds. Note for use with 4x4 modems such as the 5G modem found on the Pepwave MAX BR1 Pro 5G Router, you will need two of the Peplink Maritime 20G Antennas.
Can also be as a 2x2 MIMO Wi-Fi antenna
The antenna is designed for cellular bands but also covers both 2.4 & 5GHz Wi-Fi frequencies. To use the antennas for Wi-Fi, you will require a pair of SMA Female to RP-SMA Male Adapters. You can buy these here.
Easy installation
Supports standard maritime 1" 14 TPI thread mount and also has an L-shape mount for non-standard installations
2x Cellular plus 1x GPS
With 2 cellular channels, the Maritime 20G is a 5G-ready antenna to serve maritime deployments with its ultra-wide bandwidth. Equipped with high gain LNA, the built-in GPS receiver is ideal for tracking.
GPS Support
Includes active and high performance GPS receiver ideal for location tracking.
What's in the box?
Along with the antenna, the box contains the following:
- Maritime mount set for mounting on a 1 inch 14 TPI mount.
- L-shape mount set for wall or pole mounting.
- 6.5 feet of CFD-200 coax for cellular and RG-174 coax for GPS with SMA male adapters (2 cellular, 1 GPS)
This antenna can be used with a standard 1 inch 14 TPI marine mount such as the ones we offer
here. NOTE: The mount must be able to accommodate the three attached coax cables.
Full details on the technical specs and installation options can be found in the
datasheet. Check out the review on SeaBits
here.
[ITEMPRICE]